Deltin 7

Md. Farhad Ali and Md. Kawsar, Md. Sahadat Hossain, Sumaiya Akter : Synthesis and Characterization of Nano-Crystallite Triple Super Phosphate (TSP) from Marine Mollusk Waste: Babylonia japonica, Oliva sayana, and Conasprella bermudensis, ChemistryOpen , (impact factor:3.4) John Wiley & Sons Inc. , 2024 .

Md. Farhad Ali and Md. Abdus Shabur & A. M. Sarwaruddin Chowdhury : Gamma radiation’s influence on the tensile characteristics of waste animal fiber reinforced biocomposites, Discover Materials , (impact factor:3.3) , vol.4 Springer Open , 2024 .

Md. Abdus Shabur1 · Md. Farhad Ali1 · Md. Mukter Alam1 : Analysis of the barriers and possible approaches for adopting Industry 4.0 in the fertilizer sector of Bangladesh, Discover Applied Sciences , (impact factor:3.2) , vol.6 Springer open , 2024 .

Md. Abdus Shabur , Md. Farhad Ali : Perspectives and possibilities for developing ride-sharing services to promote sustainable mode of transport: Bangladesh perspective, Heliyon , (impact factor:3.4) , vol.10 , no.12 Cell press , 2024 .

Md. Farhad Ali and Md. Sahadat Hossain , Samina Ahmed , A.M. Sarwaruddin Chowdhury : A study of biodegradation, water uptake and thickness swelling of animal fibers reinforced unsaturated polyester resin composites, Results in Chemistry , (impact factor:2.3) , vol.8 Elsevier , 2024 .

Md. Farhad Ali, Papia Hauque, Md. Abdulla-Al-Mamun, Tamanna Jaman : Biodegradable Retanning Material From Tannery Triming Waste: Extraction, Preparation and Application, Leather and Footwear Journal , ISSN: 1583-4433 , (impact factor:0.34) , vol.23 , no.4 Revista , 2024 .

Md. Abdus Shabur and Md. Farhad Ali : An analysis of the correlation between income and the consumption of energy in Bangladesh, Energy Informatics , (impact factor:3.8) springer , pp.1-18 , 2024 .

Md. Farhad ALI and Md. Abu SAYID MIA1 , Nadia Sultana MILY , Md. Arafat Al MAMUN : CHARACTERIZATION OF ENZYME-TREATED ECO-FRIENDLY IRON TANNED LEATHER, Leather and Footwear Journal , vol.24 , no.1 Revista , 2024 .

Md.Abdulla-Al-Mamun,Mongsathowai Marma, Md. Farhad Ali, Md. Abdul Mottalib : Recovery and Reuse of Chromium from Tannery Waste Chrome-liquor using Solar Evaporation Process., , ISSN: ISSN 2623-6281 , (impact factor:1.21) , vol.6 idd3 , pp.652-666 , 2023 .

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Effects of inorganic materials on the waste chicken feather fiber reinforced unsaturated polyester resin-based composite: An approach to environmental sustainability, Composites Part C: Open Access , (impact factor:4.76) , vol.9 Elsevier , 2022 .

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : ). Fabrication and Characterization of Composite Materials Using Multiple Waste Materials (Leather & amp; Jute Fabrics) and Unsaturated Polyester Resin, Nano Hybrids and Composites , ISSN: 2297-3400 , (impact factor:5.37) , vol.33 Nano Hybrids and Composites , , pp.1-11 , 2021 .

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Utilization of waste chicken feather for the preparation of eco-friendly and sustainable composite., Cleaner Engineering and Technology , (impact factor:5.37) , vol.4 Elsevier , 2021 .

Muhammad Abdullah Al Mamun, Md. Mehedul Hasan, Md. Farhad Ali and G. M. Shafiur Rahman : Eco-Friendly Treatment of Green Banana Fiber in Compared to Chemical Treatment, Journal of Materials and Environmental Science , ISSN: SSN : 2028-2508 , (impact factor:3.55) , vol.12 , no.6 Deltin 7 Aviator গেম টাকা ইনকাম of Mohammed Premier , pp.823-826 , 2021 .

Md. Farhad Ali, A. M. Sarwaruddin Chowdhury et al. : Fabrication and characterization of eco-friendly composite materials from natural animal fibers., Heliyon, , (impact factor:5.6) , vol.7 , no.5 Cell Press , 2021 .

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Physico-Mechanical Properties of Treated Chicken Feather–Reinforced Unsaturated Polyester Resin Based Composites., Nano Hybrids and Composite , (impact factor:5.37) , vol.32 Scientific.Net , pp.73-84 , 2021 .

Md. Farhad ALI ,Mahbub KAMAL : A Comparative Study on Physical Properties of Bag and Lining Leather from Two Different Origins, Journal of Environmental Science, Toxicology and Food Technology , ISSN: ISSN: 2319-239 , (impact factor:2.3) , vol.15 , no.3 International Organization Of Scientific Research (IOSR) , pp.33-38 , 2021 .

Umme Habiba Bodrun Naher, Md. Jawad Hasan , Md. Morshedul Hasan, Md. Farhad Ali : Trace Metal Contamination of Vegetables Grown Near the Tannery Estate in Savar, Bangladesh: Human Health Risk Assessment, Textile and Leather Review , ISSN: 2623-6281 , (impact factor:1.21) , vol.4 idd3 , 2021 .

Md. Farhad Ali, Md Tanjid Ahmed Zahid, Md Tanjid Ahmed ZahidTanvir Siddike MoinTanvir Siddike Moin : Manufacturing of Novelty Leather from Sheep Stomach, International Journal of Scientific & Engineering Research , vol.11 , no.10 , pp.314-318 , 2020 .

Farhad Ali, Mukta Rani Sarkar and Arafat Hossain : IDENTIFYING THE CAUSES OF FOOTWEAR REJECTION AND DEVISING BETTER SOLUTION FOR THE IMPROVEMENT OF FOOTWEAR QUALITY, INTERNATIONAL JOURNAL OF CURRENT RESEARCH , (impact factor:7.766) , vol.12 , no.09 , pp.13693-13698 , 2020 .

Md. Farhad Ali, Md Tanjid Ahmed Zahid and Tanvir Siddike Moin : Manufacturing of Novelty Leather from Sheep Stomach, International Journal of Scientific & Engineering Research , (impact factor:4.4) , vol.11 , no.10 , pp.314-318 , 2020 .

Md. Farhad Ali, Nadim Khan and Md Tanjid Ahmed Zahid : Assessment of Typical Heavy Metals in Bangladeshi Tannery Workers’ Hair, International Journal of Research and Innovation in Applied Science (IJRIAS) , vol.5 , no.9 , pp.223-226 , 2020 .

Md. Farhad Ali, Adiba Fara, Umme Habiba Bodrun Naher, Kawsar Akhtar : Manufacturing of novelty leather from goat stomach, INTERNATIONAL JOURNAL OF CURRENT RESEARCH , ISSN: ISSN: 0975-833X , (impact factor:8.132) , vol.11 , no.07 , pp.5156-5160 , 2019 .

Nahar, Umme Habiba Bodrun, Islam,Md. Rashidul, Mia,Md Abu Sayid and Ali, Md.Farhad : Challenges and Prospects of Tannery By-product Industries ( Glue, Gelatin, Poultry and Fish Feed Industries) in Bangladesh, International Journal of science, Engineering and Technology Research (IJSETR) , vol.7 , pp.837-841 , 2018 .

Hasan M,, Begum L, Hosain S, Poddar P, Chowdhury A and Farhad Ali : Study on Heavy Metals ( Zine and Lead) in Drinking Water of Tannery Area, Adjacent Areas and Outside Village Areas., L Envirn Anal Toxicol , vol.7 , pp.433 , 2017 .

Hossain Md. Sakhawat, Rahman Md. Mizanur, Ali Md. Farhad and Nasif Tahsin Eahteshum : Investigation of Heavy Metals in Various Genre of Chicken Tissue in Deltin 7 City, Bangladesh, JECET , vol.6 , no.4 , pp.394-403 , 2017 .

Khairul Bashar, JahanSadiaAfroze, Md. Farhad Ali and AshiqurRahaman : Relative study of heavy metal contamination in fishes of Buriganga River due to untreated tannery effluent and in fishes from another source in Bangladesh”, International Journal of Current Research, International Journal of Current Research , vol.8 , no.10 , pp.4035-40403 , 2016 .

Rahaman, A., Afroze, J.S., Bashar, K., and Ali, Md. F : A Comparative Study of Heavy Metal Concentration in Different Layers of Tannery Vicinity Soil and Near Agricultural Soil, American Journal of Analytical Chemistry , vol.7 , pp.880-889 , 2016 .

Md. Arafat Hossain,, ,, Mukta Rani Sarkar, Md. Farhad Ali and Uttam Kumar Roy : Evaluation on Economic Loss for Rejection of Finished Leather in Bangladesh, Universal Journal of Environmental Research and Technology , vol.6 , no.2 , pp.91-96 , 2016 .

Ali Md. Farhad, Naher Umme Habiba Bodrun, Chowdhury, Rahman G.M. Shafiru and Hasan Md. Mahmudul : Investigation on Physicochemical parameters of tannery effluent, Universal Journal of Environmental Research and Technology , ISSN: eISSN 2249 0256 , vol.5 , no.3 , pp.122-130 , 2015 .

Ali Md. Farhad, Naher Umme Habiba Bodrun, Hasan Md. Mahmudul, Nawze Md. Shakil and Ferdous Shahanama : Analyzing the factors for rejection of leather in Bangladesh, Intenational Journal of scientific and Technology Research , vol.4 , pp.332-335 , 2015 .

Naher Umme Habiba Bodrun, Ali Md. Farhad, Hasan Md. Mahmudul and Rahman Md. Rezaur : Manufacturing of Novelty Leather from Cattle Stomach, Intenational journal of scientific and Technology Research , vol.4 , no.12 , pp.40-44 , 2015 .

Rahman G.M. Shafiur, Al-Mmamun Muhammad Abdullah, Bashar Muhammad Shafiul, M.G. Mostafa, Ali Md. Farhad and Khan Mubarak A : A study comparison between recycled waste paper reinforced polymer composite and hardboard, Rajshahi Deltin 7 Aviator গেম টাকা ইনকাম journal of Environment Science , vol.3 , pp.9-15 , 2014 .

Hossain M Azhar, M. Enayet and Ali Md. Farhad : Enhanced Physico-mechanical Properties of Polymer Resin Film Using CaCO3 Filler, J of Bangladesh Chemical Society , vol.12 , no.2 , pp.19-21 , 2003 .

Hossain M Azhar, M. Enayet and Ali Md. Farhad : Production of slow releasing fertilizer tablets, J of Bangladesh Chemical Society , vol.12 , no.2 , pp.19-21 , 2003 .