Department of Robotics and Mechatronics Engineering
| Degree Name | Group/Major Subject | Board/Institute | Country | Passing Year |
|---|---|---|---|---|
| Ph.D. | ENGINEERING | INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA | Malaysia | 2017 |
| Masters | INFORMATION TECHNOLOGY AND MECHATRONICS OF VEHICLES | INSTITUTE OF E-VEHICLE TECHNOLOGY, UNIVERSITY OF ULSAN | South Korea | 2013 |
| Bachelor | MECHANICAL ENGINEERING | CHITTAGONG UNIVERSITY OF ENGINEERING AND TECHNOLOGY | Bangladesh | 2010 |
| Title | Organization | Location | From Date | To Date |
|---|---|---|---|---|
| POST DOCTORAL FELLOW | KYUNGSUNG UNIVERSITY | BUSAN, REPUBLIC OF KOREA | 01, Sep 2019 | 25-08-2020 |
| GUEST PROFESSOR | KYUNGSUNG UNIVERSITY | BUSAN, REPUBLIC OF KOREA | 01, Sep 2019 | 25-08-2020 |
| LECTURER | UNIVERSITY OF DHAKA | DHAKA, BANGLADESH | 10, Jul 2017 | Currently Working |
| TUTOR | INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA | KUALA LUMPUR, MALAYSIA | 01, Sep 2015 | 30-06-2016 |
| GRADER | INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA | KUALA LUMPUR, MALAYSIA | 01, Feb 2013 | 30-06-2015 |
| LAB DEMONSTRATOR | INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA | KUALA LUMPUR, MALAYSIA | 01, Feb 2013 | 30-09-2016 |
| Subject | Description | Research Interest (Goal, Target Indicator) |
|---|---|---|
| SMART MATERIALS | Properties of smart materials can be controlled by applying external stimuli, such as electric and magnetic fields, temperature, stress, etc. These materials are extensively used to fabricate sensors and actuators. For example, viscosity of a magnetorheological fluid can be controlled by applying external magnetic field. This smart fluid is used to develop magnetorheological fluid based dampers and actuators. |
|
| SENSOR MODELING & FABRICATION | Sensors are microelectromechanical systems (MEMS) which are used to sense different parameters, such as position, displacement, velocity, acceleration, temperature, pressure, humidity, pH level, etc. from outside world. Mathematical modeling is required to develop a sensor. Furthermore, micro-scale fabrication technology is necessary to manufacture them. |
| Level of Study | Title | Supervisor | Co-Supervisor(s) | Name of Student(s) | Area of Research | Current Completion |
|---|---|---|---|---|---|---|
| No project/research supervision is found | ||||||
| Subject | Project Name | Source of Fund | From Date | To Date | Collaboration |
|---|---|---|---|---|---|
| Underwater robot | Design and Fabrication of an Infrared (IR) Camera Based Docking System for Autonomous Underwater Vehicles (AUVs) | UGC | |||
| Robot vision | 3D Image Reconstruction from Monocular Vision for Visual Navigation and Localization of Mobile Robots | UGC |
| SL | Invited Talk |
|---|---|
| No invited talk is found | |
| SL | Collaboration & Membership Name | Type | Membership Year | Expire Year |
|---|---|---|---|---|
| No Collaboration & Membership is found | ||||
| Journal Article | |
|---|---|
| 1 |
Shugata Ahmed, Islam M.F. Seder, Hazli Ab Manaf, Mirghani Ishak Ahmed and MNA Hawlader
: Numerical investigation of flow boiling in double-layer microchannel heat sink,
Australian Journal of Basic and Applied Sciences , vol.8 , no.15 American-Eurasian Network for Scientific Information , pp.18-24 , 2014
.
|
| 2 |
Islam M.F. Seder, Mirghani I. Ahmed, Shugata Ahmed and M.N.A Hawlader
: Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines,
Australian Journal of Basic and Applied Sciences , vol.8 , no.15 American-Eurasian Network for Scientific Information , pp.211-217 , 2014
.
|
| 3 |
Shugata Ahmed, Ahmad Faris Ismail, Erwin Sulaeman and Muhammad Hasibul Hasan
: A Comparative Analysis of Flow Boiling in Micro-Gaps with Internal Micro-Fins of Rectangular and Triangular Profiles,
International Journal of Applied Engineering Research , vol.11 , no.4 Research India Publications , pp.2364-2372 , 2016
.
|
| 4 |
Shugata Ahmed, Muhammad Hasibul Hasan, Ahmad Faris Ismail and Erwin Sulaeman
: Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap,
ARPN Journal of Engineering and Applied Sciences , vol.11 , no.1 Asian Research Publishing Network (ARPN) , pp.297-302 , 2016
.
|
| 5 |
Shugata Ahmed, Ahmad Faris Ismail, Erwin Sulaeman and Muhammad Hasibul Hasan
: A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications,
ARPN Journal of Engineering and Applied Sciences , vol.11 , no.1 Asian Research Publishing Network (ARPN) , pp.331-336 , 2016
.
|
| 6 |
Shugata Ahmed, Ahmad Faris Ismail, Erwin Sulaeman and Muhammad Hasibul Hasan
: Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins,
ARPN Journal of Engineering and Applied Sciences , vol.11 , no.1 Asian Research Publishing Network (ARPN) , pp.410-414 , 2016
.
|
| 7 |
Muhammad Hasibul Hasan and Shugata Ahmed
: Wear Resistance Performance of Conventional and Non-Conventional Wind Turbine Blades with TiN Nano-Coating,
International Journal of Engineering Materials and Manufacture , vol.2 , no.3 Deer Hill Publications , pp.37-48 , 2017
.
|
| 8 |
Shugata Ahmed, Erwin Sulaeman, Ahmad Faris Ismail and Muhammad Hasibul Hasan
: Two-Phase Fin-Induced Turbulent Cooling for Electronic Devices Using Heat Pump Associated Micro-Gap Heat Sink,
International Journal of Engineering & Technology , vol.3 , no.13 Science Publishing Corporation , pp.113-122 , 2018
.
|
| 9 |
Muhammad Hasibul Hasan, Shugata Ahmed, Ron Voldman and Mirt Mehany
: Parametric effect on surface finish of three-dimensional printed object,
International Journal of Engineering Materials and Manufacture , vol.3 , no.2 Deer Hill Publications , pp.98-104 , 2018
.
|
| 10 |
Shugata Ahmed, Ahmad Faris Ismail, Erwin Sulaeman and Muhammad Hasibul Hasan
: Experimental Correlation for Flow-boiling Heat Transfer in a Micro-gap Evaporator with Internal Micro-fins,
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , vol.54 , no.1 Akademia Baru , pp.1-8 , 2019
.
|
| 11 |
Hazli Manaf, Shugata Ahmed, Mirghani I. Ahmed and MNA Hawlader
: A triangular double layer microchannel heat sink: effect of parallel and counter flow,
Advanced Materials Research , vol.1115 Trans Tech Publications Ltd , pp.433-439 , 2014
.
|
| Conference Proceedings | |
| 1 |
Shugata Ahmed and Cheolkeun Ha "Adaptive Image Filtering for Scale Space Corner Detection."
제어로봇시스템학회 합동학술대회 논문집
, pp. 579-585. Seoul, Republic of Korea: 2012
.
|
| Award Type | Title | Year | Country | Description |
|---|---|---|---|---|
| No award information is found | ||||